Sunday, October 14, 2012

New Locomotive
Well I have a new addition to the fleet. I recently picked up a Athearn RTR HO scale BC RAIL SD40-2 with DCC and sound. It has a digitrax decoder and a soundtrax sound decoder. It hase to speakers in it so it can get pretty loud. It runs great and is very detailed.

Friday, October 5, 2012

Almost done work on Nelson Creek 

I have completed more work on the creek and the area around it as well as some new land forms that I have made. I still need MANY more trees and need to make a wooden border on the side of the foam. Once I'm done that I will put more plaster on the edges of the creek and then use woodland scenic s realistic water. All of the base scenery is done. I just need to get some more glue to put down some bushes. I also need to get some 1000 black grit sand paper for the road. 

Sunday, September 30, 2012

BC RAIL Wood Chip gondola Project 
Recently I embarked on making some BCR chip cars. BCR built these cars in the late 60's and 70's for lumber mills to ship their wood chips to pulp &paper mills. They were built by BCR and many are still in service today with CN operating the line now. My cars aren't prototypical but they will do. I took some walthers wood chips and painted them in green. I plan on making a few. I will make some with the BC RAIL logo on it and some with just the reporting marks. 

More work on Nelson Creek
I recently have done more work on the creek and the area around it. I put down more plaster cloth and then put plaster over it. I then used woodland scenic's ground colour to give the ground some colour before I put down the ground foam and shrubs. I also picked up some tree's that were on discount at my local hobby store.

Sunday, September 9, 2012

Upcoming Macmillan Bloedel  Alberni Pulp and paper division SW900u switcher project
Well I have come up with another interesting project. Macmillan Bloedel was a very large producer of forest products in British Columbia. Their operations were on Vancouver island and the Sunshine coast. They produced both lumber and pulp and paper. They were doing fine until the late 1990's when they were bought out by Weyerhaeuser and sold of piece by piece. They had switchers at all of their mills in the BC coast. The one that I really came to like was the one at port alberni. It is not used at port alberni any more thanks to Rail America pissing of the new owner Catalyst and Catalyst switched to truck. The switcher was a former southern pacific unit acquired by Macmillan Bloedel in the late 80's to replace their old GE 40 tonner locomotive. The switcher would take the cars that CP (later Rail America) brought in and switched them around the mill and placed the outgoing loads for CP. For this project I plan to use a athearn blue box SW9. I will paint it and modify it and paint in and decal it.


Saturday, September 8, 2012

BC RAIL "Slug" Project

Recently I have embarked on making one of the famous BC RAIL slugs. Slugs are booster units made from old locomotives. BC RAIL took old alco RS-3's and removed the motor and fuel tank and modified the body. They kept the traction motors. The "slugs" had special electrical connections with their partner locomotive. The slug received electricity from the partner locomotive and that electricity went to the traction motors. You can think of slugs as booster units. I built my slug from a athearn blue box GE U30C. It is about as long as an RS3 and uses the same trucks to. I removed the motor and gears. I then cut the top part of of the shell. I still have to remove the fuel tank. I will have to construct a new body.

Tuesday, August 28, 2012

                                     Vancouver Island Trip August 2012
                                                          Here are some photos from my vancouver island trip. 

Tuesday, August 14, 2012

Squamish Railfanning July 13th an14th
                                                    Rocky Mountaineer